中高压防爆集尘器（卧式）

Dust Removal is Crucial for Manufacturing

Ex his quidam aeternitati se commendari posse per statuas aestimantes eas ardenter adfectant quasi plus praemii de figmentis aereis sensu carentibus adepturi, quam ex conscientia honeste recteque factorum, easque auro curant inbracteari, quod Acilio Glabrioni delatum est primo, cum consiliis armisque regem superasset Antiochum. quam autem sit pulchrum exigua haec spernentem et minima ad ascensus verae gloriae tendere longos et arduos, ut memorat vates Ascraeus, Censorius Cato monstravit. qui interrogatus quam ob rem inter multos... statuam non haberet malo inquit ambigere bonos quam ob rem id non meruerim, quam quod est gravius cur inpetraverim mussitare.

Intrinsically Safe Design

The entire system (equipment, motor, and control cabinet) is explosion-proof, eliminating ignition sources at the root.
Optimization for Conductive Dust

Specialized filter media and anti-static measures prevent static electricity accumulation and equipment failure caused by conductive dust.
Compatibility with Dry Environments

The solution considers compatibility with low-humidity dry room environments to avoid compromising battery production quality.

优势与特点

性能特点

防爆环境安全设计

专为在爆炸性环境保障安全操作而设计。
CNEX/ATEX认证保障

符合CNEX及ATEX认证要求，提升易燃环境下的安全性。
大风量稳定负压输出

提供稳定的负压输出，具备超大风量。
高效水平滤筒结构

采用水平滤筒安装方式，显著提升设备运行与维护效率。
强力脉冲反吹清灰

全系标配强力脉冲反吹清灰系统，确保滤筒高效运行无堵塞。
纳米阻燃防静电滤芯

配置纳米阻燃防静电滤芯，可有效拦截小至0.3μm的微粒。
二级高效洁净过滤

设置二级高效过滤器，有效减少微纳米粉尘排放，排放可达千级无尘车间要求。
BIBO无泄漏更换设计

预设BIBO滤筒更换方式，确保滤筒更换无粉尘泄露。

01 / 08

Advantages

Pioneer in Dust Collection & Explosion Protection Solutions

Paphius quin etiam et Cornelius senatores, ambo venenorum artibus pravis se polluisse confessi, eodem pronuntiante

24/7 Online Support

We offer 24/7 online support to assist with all your Power Supply needs.

Reduce High Equipment
Failure Rate

Conductive dust intrusion into precision equipment causes frequent breakdowns and downtime

Environmental Protection And Compliance Pressure

Strict environmental protection regulations and safety production access requirements.

型号	DT-EX-055-MP	DT-EX-075-MP	DT-EX-110-MP	DT-EX-150-MP	DT-EX-220-MP	DT-EX-300-MP
电压(V/Hz)	380/50
功率(kW)	5.5	7.5	11	15	22	30
最大风量(m³/h)	3656	4116	4500	5400	6500	8000
过滤面积(m²)	88	88	88	132	132	176
过滤效率	>99%
集尘箱容积	可定制容积
清灰方式	脉冲反吹式
进风口径(mm)	∅200	∅200	∅250	∅250	∅250	∅273
尺寸[L×W×H] (mm)	235012602300	235012602300	235014002300	245017002900	255017002900	255017503680

Case Study

Dust Removal In Electrode Workshop
- Challenge: Humidity in the workshop must be kept below 1%, and NCM811 cathode material is highly explosive.
- Solution: Anti-static filter cartridges, explosion-proof valves, and a spark detection and extinguishing system are used throughout.
- 48%
  Dust concentration
- 63%
  Safety Incidents
Case Study

Dust Removal In Electrode Workshop
- Challenge: Humidity in the workshop must be kept below 1%, and NCM811 cathode material is highly explosive.
- Solution: Anti-static filter cartridges, explosion-proof valves, and a spark detection and extinguishing system are used throughout.
- 48%
  Dust concentration
- 63%
  Safety Incidents
Case Study

Dust Removal In Electrode Workshop
- Challenge: Humidity in the workshop must be kept below 1%, and NCM811 cathode material is highly explosive.
- Solution: Anti-static filter cartridges, explosion-proof valves, and a spark detection and extinguishing system are used throughout.
- 48%
  Dust concentration
- 63%
  Safety Incidents